Copy; Synchronous Copy - StarTech.com 8STUSBDUP12 Instruction Manual

1. Copy

There are two types of copy modes, Asynchronous Copy and Synchronous Copy. The
system will check the content size of the source before executing the 'copy' function.
If the source content size is less than the system's buffer memory, it will automatically
start an Asynchronous copy. If the source content size is larger than the system's buffer
memory, it will copy in Synchronous mode.

1.1 Synchronous Copy

To configure, go to function "7.6 Asynchronous" and select "Disable". If the source's
content size is larger than system's buffer memory, it will execute Synchronous Copy
and ignore which copy mode has been set at function 7.6.
Operating Process
1. Plug in the source and destination Flash drive(s). Select the copy function and
press OK.
2. The copy will start automatically if two destination Flash drives are connected.
Otherwise, press OK to start the copy.
3. When the copy has completed, the LCD display will show the total time it took to
copy, the number of passes, and if there were any failures.
Instruction Manual
USB 1847M
Reading Content
USB (1847M) 230M
1 to start..
The number of target flash plugged in and ready to copy
Copy
30% 0:18
Progressed time and percentage
TOTAL OK:1 NG:0
01:06
Capacity of source
230M
Content size
71M
Progressed size
OK:1 NG:0
5