Working Mode; Set Hdd Mode; Restore Default - StarTech.com 8STUSBDUP12 Instruction Manual

Usb 2.0 1-to-2 standalone flash drive duplicator

Table of Contents

7.10 Working Mode

There are 5 duplication speeds:

• Slowest Mode

• Slower Mode

• Normal Mode (default setting)

• Faster Mode

• Fastest Mode

Change the duplication speed. Normal speed is recommended for most Flash drive

types. If there is a high failure rate when duplicating, try lowering the speed.

Choose 'Active Mode' to duplicate to USB Hard Disk Drives (HDD/SSD). Choose 'Inactive

Mode' to duplicate USB Flash drives. Inactive mode is set by default.

Restore the system back to factory defaults.

Instruction Manual

Table of Contents

Do you have a question about the 8STUSBDUP12 and is the answer not in the manual?

Usbdup12