Download Print this page

Disposal Of Batteries; Replacing The Battery - Jula Anslut 422-352 Operating Instructions Manual

Solar cell lamp

Advertisement

Available languages

Available languages

Function
In daylight, the solar panel on the solar cell lamp converts sunlight into electricity and charges the
batteries. When it gets dark the lamp goes on automatically and is powered by the batteries. The position,
weather conditions and season affect the length of time that the batteries can power the lamp.
Positioning
Place the product so that it is exposed to full sunlight at least 6 hours per day. The batteries will not be
fully charged if the solar cell lamp is placed in the shade, which will produce a shorter lighting-up time. Do
not place solar cell lamps near sources of light such as street lamps, as this may prevent them from
lighting up. Solar cell lamps are ideal for night lighting in gardens. They can also be charged outdoors
during the day and used for indoor lighting.
IMPORTANT: Avoid battery leakage
Insert the batteries with the correct polarity and in accordance with the manufacturer's instructions.
Do not mix old and new batteries, or batteries of different types (standard, alkaline or
rechargeable).
Always remove old or weak batteries.

Disposal of batteries

Recycle used batteries in accordance with local regulations.
Replacement batteries can be bought in most stores that sell electrical appliances.
Before using for the first time
The lamp is controlled automatically by the light sensor when the switch is in the ON position. When it
gets dark the lamp goes on automatically and is powered by the batteries. You can press the switch again
to turn off the lamp and save energy.
Carry out the following checks if the lamp does not go on automatically after being charged for at least 6
hours during the day.
1.
Check that the power switch is in the ON position.
2.
Check that the battery is in contact with the terminals and has the correct polarity.
3.
Check that the solar panel is exposed to direct sunlight.

Replacing the battery

Replace the battery if the product stops working. Open the battery cover and replace the battery with a
new one of the type (rechargeable NiMH, AAA, 1.2 V, 300 mAh).
Screw
Screw
Screw
ENGLISH
USE
OFF
ON
12
Screw
Power switch

Advertisement

loading