Table of Contents
Advertisement
When applying the brake for
4
approximately one second af-
ter the vehicle has come to a
78
standstill and on a slope with at
least a 3% gradient, Hill Start
Control Pro is activated auto-
matically.
The selected setting is retained
even after the ignition is turned
off.
Shiftpoint light
z
Turning the shiftpoint
light on and off
Call up menu Settings, Ve-
hicle settings.
Turn Shift light on or off.
Setting shifting flash
Turn on the Shift light
function.
Go to menu Settings, Vehi-
cle settings, Configura-
tion (under Shift light).
The following settings are avail-
able:
Start RPM
End RPM
Brightness
Frequency. A flashing fre-
quency of 0 Hz corresponds to
continuous lighting.
Changes to the brightness and
the flashing frequency are sig-
naled by the shiftpoint light
briefly lighting up or flashing.
Anti-theft alarm system
(DWA)
with anti-theft alarm system
OE
(DWA)
Activation
Switching on ignition (
Adjust DWA (
80).
Switch off ignition.
If DWA is activated, DWA is
automatically activated after the
ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
The anti-theft alarm system is
active.
58).
Advertisement
Table of Contents
