Table of Contents
Advertisement
76
OPERATION
the handbrake or footbrake
lever.
When applying the brake for
approximately one second af-
ter the vehicle has come to a
standstill and on a slope with
at least a 5% gradient, Hill
Start Control Pro is activated
automatically.
The selected setting is re-
tained even after the ignition
is turned off.
SHIFTPOINT LIGHT
with riding modes Pro
Turning the shiftpoint light on
and off
Call up
Settings
menu.
settings
Switch
Shift light
off.
Setting shifting flash
Switch on the
function.
Call up
Settings
,
settings
menu (via
Shift light
The following settings are
available:
Start RPM
End RPM
Brightness
Frequency
quency of 0 Hz corresponds
to continuous lighting.
OE
,
Vehicle
on or
Shift light
,
Vehicle
Configuration
).
. A flashing fre-
Changes to the brightness
and the flashing frequency are
signaled by the shiftpoint light
lighting up or flashing.
ANTI-THEFT ALARM SYSTEM
(DWA)
with anti-theft alarm system
(DWA)
OE
Activation
Turning on the ignition
(
54).
Adjust DWA (
Turn off the ignition.
If DWA is activated, DWA is
automatically activated after
the ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn signals flash twice.
Confirmation tone sounds
twice (if programmed).
The anti-theft alarm system is
active.
with Keyless Ride
Turn off the ignition.
78).
OE
Advertisement
Chapters
Table of Contents
