Shiftpoint Light; Anti-Theft Alarm System (Dwa) - BMW Motorrad R 1250 RS 2022 Rider's Manual

Table of Contents

Advertisement

Hill Start Control Pro can be
activated by firmly applying
the handbrake or footbrake
lever.
During brake actuation for
approximately one second af-
ter the vehicle has come to a
standstill and on a slope with
at least a 3% gradient, Hill
Start Control Pro is activated
automatically.
The selected setting is re-
tained even after the ignition
is turned off.

SHIFTPOINT LIGHT

Turning the shiftpoint light on
and off
Call up menu
hicle settings
Turn
Shift light
Setting shifting flash
Turn on the
function.
Go to menu
hicle settings
figuration
).
light
The following settings are
available:
Start RPM
End RPM
Brightness
,
Settings
.
on or off.
Shift light
,
Settings
Ve-
,
Con-
(under
Shift
Frequency
quency of 0 Hz corresponds
to continuous lighting.
Changes to the brightness
and the flashing frequency are
signaled by the shiftpoint light
lighting up or flashing.
ANTI-THEFT ALARM SYSTEM
(DWA)
with anti-theft alarm system
(DWA)
Activation
Turn on the ignition. (
Adjust the anti-theft alarm
system. (
Turn off the ignition.
If DWA is activated, DWA is
Ve-
automatically activated after
the ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn signals flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm system is ac-
tive.
. A flashing fre-
OE
82)
79
56)

Advertisement

Table of Contents
loading

Table of Contents