Download Print this page

Gefen HDMI-142 User Manual

1:2 distribution amplifier for hdmi

Advertisement

Quick Links

1:2 Distribution Amplifi er
d
For
Model # EXT-HDMI-142
U S E R M A N U A L
www.gefen.com

Advertisement

loading

Summary of Contents for Gefen HDMI-142

  • Page 1 1:2 Distribution Amplifi er Model # EXT-HDMI-142 U S E R M A N U A L www.gefen.com...
  • Page 2 Chatsworth, CA 91311 support@gefen.com www.gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1:2 Distribution Amplifi er For HDMI HDMI™ is a trademark of HDMI.org ©...
  • Page 3: Table Of Contents

    Introduction / Operation Notes Features Panel Descriptions Connecting and Operating the 1:2 HDMI Distribution Amplifi er For HDMI / Application Diagram Dip Switch Guidelines Specifi cations Warranty TABLE OF CONTENTS...
  • Page 4: Introduction / Operation Notes

    The Gefen 1:2 HDMI Distribution Amplifi er is the perfect solution for anyone who needs to send one source of digital high defi nition video to multiple displays at the same time. It supports all HDMI equipment, such as DVD players and satellite set top boxes and all HDMI displays.
  • Page 5: Features

    Features • Connects up to two HDMI/DVI* displays at the same time to one video source • Allows simultaneous display • Supports resolutions up to 1080p, 2K, and 1920 x 1200 • Extends the range of HDMI compliant devices by equalizing and re-clocking the HDMI signal •...
  • Page 6: Panel Descriptions

    PANEL DESCRIPTIONS...
  • Page 7 CONNECTING AND OPERATING THE 1:2 DISTRIBUTION AMPLIFIER FOR HDMI How to Connect the 1:2 Distribution Amplifi er For HDMI Connect the supplied cable from the HDTV HDMI source into the HDMI input port of the 1:2 Distribution Amplifi er For HDMI. Connect the user supplied cable(s) from your display(s) into the HDMI output port(s) of the1:2 Distribution Amplifi...
  • Page 8: Dip Switch Guidelines

    To access the Dip Switches, remove all screws from the bottom and sides of the Gefen unit. Carefully slide the unit apart. The 8 Bank of Dip Switches are located on the main PCB. Once adjustments are complete, slide the unit back together and replace all removed screws.
  • Page 9: Specifi Cations

    SPECIFICATIONS Video Amplifi er Bandwidth ... 165 MHz Input Video Signal ... 1.2 Volts p-p Input DDC Signal ... 5 Volts p-p (TTL) Single Link Range ..1080p / 1920 x 1200 Input Connector Type ... HDMI Type A 19 Pin Output Connector Type ...HDMI Type A 19 Pin Audio Output ...

This manual is also suitable for:

Ext-hdmi-142