Quick Cleaning - Philips HD3860/00 User Manual

8 Use the dome
(HR3868 only)
(Fig. 5)
You can use the dome to reduce the
noise during blending.
Follow the steps to assemble and use
the dome as indicated in fig. 5.
9 Cleaning (Fig. 6)
Warning
•
Before you clean the appliance, unplug it.
•
Refer to Fig. 6 for information on cleaning the
parts with water, dishwashing machine and/or
moist cloth.
•
Do not remove the rubber pad on top of the
motor unit.
Caution
•
Make sure that the cutting edges of the blades
do not come into contact with hard objects.
This may cause the blade to get blunt.
•
The cutting edges are sharp. Be careful when
you clean the blade units.
1
Clean the motor unit with a moist
cloth.
2
Clean the other parts in hot water
(< 60°C) with some washing-up
liquid or in a dishwasher.
3
Store the appliance and accessories
in a dry place after cleaning.

Quick cleaning

Follow the steps below to clean the
blender jar easier.
1
Pour lukewarm water (not more
than 1 liters) and a few drops
of washing-up liquid into the
blender jar.
2
Insert the measuring cup and
close the lid.
3
Turn the knob to speed 10. Let
the blender run for 30 seconds or
until the blender jar is clean.
4
After use, switch off the blender
and then unplug the appliance.
5
Remove the blender jar and rinse
it with clean water.
EN 13