BMW S 1000XR 2018 Rider's Manual page 146

9
144
Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 1
toward the front.
z
Roll rear wheel as far forward
as possible and lay chain 1 on
sprocket.
Insert right-hand adjusting
plate 1 in swinging arm.
Raise the rear wheel and in-
stall the quick-release axle 2
through the shim in the brake-
caliper support and the rear
wheel.
Make sure that quick-release
axle meets the recess for key
surfaces.
Mount adjusting plate on left 1.
Install nut 2 with washer, how-
ever do not tighten yet.