Resetting Control Panel Defaults - Epson WorkForce Pro WF-M5299 User Manual

7. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this guide or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic:
Related concepts
Print Head Cleaning
Print Quality Adjustment
Uninstall Your Product Software
Related references
Where to Get Help

Resetting Control Panel Defaults

If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the
2. Select Settings.
3. Select General Settings.
4. Scroll down and select System Administration. Enter the administrator password, if necessary.
5. Scroll down and select Restore Default Settings.
Solving Problems
home button, if necessary.
185