Aligning The Print Head Using The Product Control Panel - Epson WorkForce Pro WF-M5299 User Manual

Note: Banding may also occur if your print head nozzles need cleaning.

Aligning the Print Head Using the Product Control Panel

Parent topic:
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance > Print Head Alignment.
5. Select one of the following options:
• Ruled Line Alignment if your printout is blurry.
• Horizontal Alignment if your printout contains horizontal banding.
6. Follow the on-screen instructions to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
7. Check the printed patterns on the alignment sheet and select the following on the LCD screen,
depending on the alignment pattern you printed:
• Ruled Line Alignment: Select the number representing the pattern with the least amount of
separation or overlap.
Adjusting Print Quality
home button, if necessary.
172