Preparations
FM wire antenna
speaker
(right)
Rear connections
The type plate is located at the rear of the
system.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
AM
AERIAL
FM
AERIAL
SPEAKERS
RSP-134V
AC power cord
B
Antenna Connection
MW Antenna
Connect the supplied MW loop antenna to the
"MW aerial" terminal. Adjust the position of the
antenna for optimal reception.
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
MW
MW loop
antenna
speaker
(left)
5