Note
Do NOT FULLY TIGHTEN any Bolts,
Nuts or Fittings at this stage unless
specifically instructed to do so
Assembly
2.
Connect the Rear Stabilizer (31) to the Rear Frame (7)
with 2 x M8 x 65 Carriage Bolts (44), 2 x M8 Curved
Washers (47), 2 x M8 Spring Washers (46) and 2 x M8
Dome Nuts (45). Repeat for the Front Stabilizer and
tighten all Nuts and Bolts securely.
Page 17