Scale Ma Channel To Temperature; Set 0 % And 100 % Output Parameters - Fluke 714B/EN User Manual

Scale mA Channel to Temperature

The Product provides a function to convert mA current
channel reading to temperature reading.
To scale mA channel to temperature:
1. Push .
2. Push .
The temperature reading shows on the display.
To switch back to mA channel:
1. Push .
2. Push .
The mA current reading shows on the display.
Temperature at 4 mA = Span check 0 %
Temperature at 20 mA = Span check 100 %
Note
Scale mA Channel to Temperature

Set 0 % and 100 % Output Parameters

You must set the 0 % and 100 % points before you can
use the step and ramp functions or use mA/temperature
conversion. Proceed as follows:
1. If necessary, push  for Source mode.
2. Use the arrow keys to enter the value for 0 %.
3. Push  and then  to set the 0 % value.
4. Use the arrow keys to enter the value for 100 %.
5. Push  and then  to set the 100 % value.
6. Use , , , or  to adjust the value.
This function is only available when Source
mode is selected.
Thermocouple Calibrator
Note
21