Functional description Notes regarding the operating manual ......1 Information about the device........... 1 The pyrometer TP7 uses an infrared sensor to measure surface temperatures without contact. An integrated dual laser pointer Technical data ..............2 can be switched on for the precise determination of the Safety ................
9 V battery Switch off After approx. 10 seconds of non-use Scope of delivery • 1 x Pyrometer TP7 • 1 x 9 V battery • 1 x Device bag • 1 x Getting started guide Operating manual – Pyrometer TP7...
Do not use abrasive cleaners or solvents to clean the device. 1. Open the cover of the battery compartment (23). 2. Use the battery clip (22) to connect the new battery with correct polarity. 3. Close the cover of the battery compartment (23). Operating manual – Pyrometer TP7...
Page 5
– At the upper edge you can see an opening leading to the inside of the device. That is where the switch is located. 3. Flip the switch by means of a suitable tool (e.g. a paper clip). 4. The unit is set to °F. Operating manual – Pyrometer TP7...
Directive 2002/96/ compatibility. EC of the European Parliament and Council of Herewith, we declare that the pyrometer TP7 was developed, 27th January 2003 concerning old electrical and constructed and produced in compliance with the named EC electronic equipment.
Page 9
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-0 +49 2452 962-200 info @ trotec.com www.trotec.com...