Table of Contents
Advertisement
Status Display
VCR
DVD
press
1
2
3
4
5
6
7
8
9
0
+10
PLAY
STOP
VCR/DVD COMBINATION
NA527AD
You can check the Counter or Clock & Channel number.
1.
Each time you press DISPLAY, TV screen will change as
illustrated:
When you select the channel using the remote control
the Number buttons, select the desired channel
(position number).
Hi-Fi Stereo Sound System
VCR
DVD
press
1
2
3
4
5
6
7
8
9
0
+10
PLAY
STOP
VCR/DVD COMBINATION
NA527AD
This VCR/DVD will record and playback Hi-Fi stereo sound. In addition it has an A2 and NICAM stereo sound decoder.
This VCR/DVD will receive stereo and bilingual broadcasts and there are several ways of recording and playing back the sound.
1.
Each mode is indicated on the TV screen as following.
• During playback of the recorded tape in Hi-Fi mode
• During reception of stereo broadcasts
Mode
Stereo
L
L audio from the both speakers
R
R audio from the both speakers
Normal
Hint
• If you play non-Hi-Fi tapes, the VCR/DVD will play automatically in monaural even if you select any mode.
• If the stereo signal becomes weak, the broadcast is automatically recorded in monaural.
Video Casette Tape
The VCR/DVD will operate with any casette
that bears the VHS mark. For best results, we
recommend the use of high-quality tapes. Do
not use poor quality or damaged tapes.
• You can prevent accidental erasing of a
recording by breaking off the erase-protection tab on the back edge
of the casette.
• If you decide to record on the tape again, cover the hole with plastic
tape.
TV Colour System
Different countries use different television colour systems. Tapes
recorded in the PAL, MESECAM or NTSC system can be played back
on this VCR/DVD. Usually, the picture on the TV screen will be in black
and white when you play back a tape that is recorded in a different
colour system.
Tapes recorded in the NTSC system can be played back on this
VCR/DVD and a PAL system TV set. This feature is only available in the
SP mode. When playing back such tapes, the picture may roll up or
down, shrink vertically and black bars may appear both at the top and
bottom of the screen. Adjust the vertical hold control on your TV, if
the TV features this control.
Hint
• When playing an NTSC tape playback picture may become
blurred or picture noise may appear during speed search, slow
motion or still mode. This is not a malfunction.
Downloaded from:
http://www.usersmanualguide.com/
O
first.
first.
Audio output
Stereo
Monaural
erase-protection tab
I
THER
NFORMATION
<OFF mode>
• During reception of bilingual broadcasts
Display on
Mode
the TV screen
STEREO
Main
LEFT
Sub
RIGHT
Main/Sub
- None -
Automatic Operation
Automatic Rewind, Eject, Off
When the end of a tape is reached during recording, playback or fast
forward, the tape will automatically rewind to the beginning. After
that, the VCR/DVD will eject the tape.
• The tape will not auto-rewind during Timer Recording or One Touch
Recording.
Tape Eject
A tape can be ejected with the VCR/DVD power on or off (but the
VCR/DVD must be plugged in).
• If a Timer Recording is set, press STOP C/EJECT A twice to eject a
tape.
Real Time Tape Counter
• This shows the elapsed recording or playback time in hours, minutes
and seconds on screen.
(Nothing is shown in the case of blank portion.)
• The " – " indication will appear when the tape is rewound further
than the tape counter position "0:00:00".
• To reset tape counter, press CLEAR/C-RESET.
– 19 –
<COUNTER mode>
C
SP
Press once.
Press once.
0:12:34
Press once.
Audio output
Main audio from the both speakers
Sub audio from the both speakers
• Main audio from the left speakers
• Sub audio from the both speakers
<CLOCK and CHANNEL
NUMBER mode>
C
17:40
SP
P02
STEREO
Display on
the TV screen
MAIN
SUB
MAIN + SUB
EN
Advertisement
Table of Contents
