Transducer Set; Basic Requirements, Operational Safety - PCE Instruments PCE-P30U User Manual

2. TRANSDUCER SET

- PCE-P30U transducer
- user's manual
- plug-able screw terminal blocks
3. BASIC REQUIREMENTS,
OPERATIONAL SAFETY
The transducer meets the requirements of EN 61010-1 standard
in terms of operational safety.
Safety precautions:
• The assembly and installation of electrical connections must be
carried out by a person authorized to install electrical equipment.
• Before switching the transducer on, one must check the correct-
ness of connections.
• The device is destined to be installed and used in industrial electro-
magnetic environment conditions.
• The building installation should be equipped with a switch
or an automatic circuit breaker located near the device,
which should be easy accessible by the operator and properly
marked.
• Removal of the transducer housing during the warranty period
may cause its invalidation.
8
1 pc.
1 pc.
4 pcs.