Table of Contents
Advertisement
5.5.4. LCD display
The PCE-P30U transducers are equipped with a backlit LCD display con-
sist of two lines of 8 characters each. The top line of the display is used for
presenting the displayed value in floating point format (5 digits) and for
displaying the SD/SDHC card or internal file system memory status
pictograms, or maximum or minimum value pictograms after pressing
or
Symbol
of display
The PCE-P30U transducer automatically adjust the format (accura-cy)
of display to the displayed value. T o fully use the function, go to menu
and
select
or enter "0" in register 4021, then the transducer will display
the displayed value with as much accuracy as possible. Note that
a higher resolution display is not always helpful, because it may lead
to a decreased stability of indications.
Measurement range overflows are indicated by displaying special signs
at the upper line of the LCD display:
keys.
Method
SD/SDHC card or internal file system memory
constant
mounted and ready to operate
SD/SDHC card unmounted and ready for remo-
blinking
ving
blinking
SD/SDHC card is protected against writing
SD/SDHC card or internal file system memory is
blinking
full
Displays the maximum value of displayed value
constant
(value measured and counted from main input)
Displays the minimum value of displayed value
constant
(value measured and counted from main input)
Settings
Display
Meaning
→
DecimalP
Table 15
→
0.0000
57
Advertisement
Table of Contents
