Panasonic PT-DW10000U Operating Instructions Manual page 64

How to use ADVANCED MENU (continued)
15. Use ◄► to adjust the width for
correcting the "BRIGHT INSIDE"
setting (0 to 255).
16. Press ▲▼ to select "BRIGHT
OUTSIDE".
BRIGHT ADJUST BRIGHT ADJUST
BRIGHT INSIDE BRIGHT INSIDE
BRIGHT OUTSIDE BRIGHT OUTSIDE
UPPER UPPER
LOWER LOWER
LEFT LEFT
RIGHT RIGHT
MENU SELECT MENU SELECT
ADJUST ADJUST
17. Press ENTER.
• The "BRIGHT OUTSIDE" adjustment screen
will be displayed.
BRIGHT OUTSIDE BRIGHT OUTSIDE
INTERLOCKED INTERLOCKED
Wh Wh
R R
G G
B B
MENU SELECT MENU SELECT
CHANGE CHANGE
• When "INTERLOCKED" is set to "OFF",
individual adjustment of "R", "G" and "B" will be
possible.
18. Press ▲▼ to select an item, and
press ◄► to adjust the setting.
Projection Projection
range range
BRIGHT adjustment BRIGHT adjustment
(right) (right)
BRIGHT INSIDE BRIGHT INSIDE
64
– ENGLISH
0 0
0 0
0 0
0 0
ON ON
0 0
0 0
0 0
0 0
Edge blending width (right) Edge blending width (right)
BRIGHT OUTSIDE BRIGHT OUTSIDE
Note
• The BRIGHT adjustment is a function for making
the brightening of the BRIGHT level in those areas
where the pictures overlap less conspicuous
when multi-screens have been configured using
edge blending. The optimal point is where, after
the BRIGHT INSIDE has been adjusted, the
compensation amount is the same for the BRIGHT
levels in the areas where the pictures overlap and
where the pictures do not overlap. If, after the
BRIGHT INSIDE adjustment, only the vicinity of
the borders of the areas where the pictures overlap
and where the pictures do not overlap becomes
bright, proceed to adjust the top, bottom, left and
right widths. Alternatively, if only the vicinity of
the borders has darkened as a result of the width
adjustments, proceed with the BRIGHT OUTSIDE
adjustment.
• When a rear screen or screen with a high gain is
used, the joints may appear to be discontinuous
depending on the viewing position.
Frame delay
When 1080/60i, 1 080/50i and 1 080/24sF signals are
being input, this simplifies image processing so that
the frame delay for pictures can be shortened.
1. Press ▲▼ to select "FRAME
DELAY".
Marker Marker
2. Press ◄► to switch "FRAME
DELAY".
•
•
•
ADVANCED MENU ADVANCED MENU
DIGITAL CINEMA REALITY DIGITAL CINEMA REALITY AUTO AUTO
BLANKING BLANKING
INPUT RESOLUTION INPUT RESOLUTION
CLAMP POSITION CLAMP POSITION
EDGE BLENDING EDGE BLENDING OFF OFF
FRAME DELAY FRAME DELAY
DEFAULT DEFAULT
RASTER POSITION RASTER POSITION
MENU SELECT MENU SELECT
CHANGE CHANGE
The setting will change as follows each time
◄► is pressed.
DEFAULT DEFAULT
DEFAULT:
This is the standard setting
SHORT:
This causes the pictures to be delayed after the
audio.
SHORT SHORT