Panasonic PT-DW10000U Operating Instructions Manual page 54

Adjusting the picture (continued)
Registering the picture
mode settings as presettings
The picture settings that have been made in the
PICTURE MODE screen can be registered.
• Select "PICTURE MODE" in the "PICTURE" screen
to carry out this operation.
1. Press ENTER.
• A confirmation screen will appear.
SAVE AS DEFAULT SETTING SAVE AS DEFAULT SETTING
FOR DYNAMIC? FOR DYNAMIC?
OK OK
CHANGE CHANGE
EXECUTE EXECUTE
ENTER ENTER
2 Press ◄► to select "OK".
3. Press ENTER.
Note
• If the registered picture mode is selected after
registering the picture mode settings as presettings,
the new signals will be displayed with the registered
adjustments.
Setting the system format
The SYSTEM SELECTOR setting can be used to
switch the system format.
1. Press ▲▼ to select "SYSTEM
SELECTOR".
PICTURE PICTURE
PICTURE MODE PICTURE MODE
CONTRAST CONTRAST
BRIGHTNESS BRIGHTNESS
COLOR COLOR
TINT TINT
COLOR TEMP. COLOR TEMP.
GAMMA GAMMA
SHARPNESS SHARPNESS
NOISE REDUCTION NOISE REDUCTION
DYNAMIC IRIS DYNAMIC IRIS
SYSTEM SELECTOR SYSTEM SELECTOR
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "SYSTEM
SELECTOR".
• Refer to "How to change the system format"
below for details on the system formats which
can be selected.
54
– ENGLISH
CANCEL CANCEL
NATURAL NATURAL
0 0
0 0
10 10
1 1
DEFAULT DEFAULT
DEFAULT DEFAULT
0 0
OFF OFF
OFF OFF
AUTO 1 AUTO 1
How to change the system format
Using the menu screen operation enables the user to
make the following changes depending on S-Video /
Video input or the currently selected input module.
The name of the selected system such as RGB,
YP P and AUTO is displayed on the top left of the
B R
screen and disappears automatically.
■
S-video / Video terminal input
signal
For the setting of AUTO1:
Selection is automatically made out of NTSC,
PAL, SECAM, NTSC4.43 and PAL60.
For the setting of AUTO2:
Selection is automatically made out of NTSC,
PAL-M and PAL-N.
PAL60 PAL60
SECAM SECAM
PAL-N PAL-N
PAL-M PAL-M
PAL PAL
■
Input module
ET-MD77SD1:
AUTO AUTO
ET-MD77SD3:
576i 576i
480i 480i
720/50p 720/50p
1 080/24sF 1 080/24sF
1 080/25p 1 080/25p
1 080/30p 1 080/30p
AUTO1 AUTO1
AUTO2 AUTO2
NTSC NTSC
NTSC4.43 NTSC4.43
480i 480i 576i 576i
AUTO AUTO
1 080/60i 1 080/60i
1 035/60i 1 035/60i
720/60p 720/60p
1 080/24p 1 080/24p
1 080/50i 1 080/50i