Upgrading Memory - Gateway Solo 2150 User Manual

Upgrading memory

To add a memory (RAM) module, you must access the memory bay. Your
notebook has one memory slot that accepts one SO-DIMM memory module.
If you want to use Hibernate (Save to Disk) mode to save power, you must
run a memory configuration utility after changing the memory. For more
information on Hibernate mode, see "Changing settings in Windows 98" on
page 45.
Caution
To add a memory module:
1 Shut down the notebook, then disconnect the power cord and remove
the battery.
2 Turn the notebook over, then remove the two screws that secure the
memory bay cover.
Disconnect all power supply cords and remove the battery
before the memory bay cover is removed. Replace the
cover before you restore power.
Upgrading memory
37