Memory; Modem - Gateway Solo 1150 User Manual

Gateway solo 1150: user guide
Table of Contents

Advertisement

Memory

You receive a "Memory error" message
Make sure the memory modules are inserted correctly in the memory bay
slot. For more information, see "Installing memory" on page 119.
Use diagnostic programs to help determine if a memory module is failing.
For more information, see "Installing memory" on page 119.
You receive a "Not enough memory" error message
Close all programs, then restart the computer.

Modem

Your modem does not dial or does not connect
Make sure your computer is connected to the telephone line and the
telephone line has a dial tone. Use the Setup poster to make sure that
the connections have been made correctly.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
If you have additional telephone services such as call waiting, call
messaging, or voice mail, make sure that all messages are cleared and call
waiting is disabled before using the modem. Contact your telephone
service to get the correct code to temporarily disable the service. Also
make sure the modem dialing properties are set appropriately.
To check the dialing properties:
1
Click
window opens.
2
If you do not see the
3
Double-click the
Dialing Properties window opens.
4
Make sure all settings are correct.
158
Troubleshooting
, then select
Start
Settings
Modems
Modems
, then
Control Panel
icon, click
view all control panel options
icon, then click
Dialing Properties
. The Control Panel
. The
.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents