Passwords; Power; Printer - Gateway Solo 1150 User Manual

Passwords

The computer does not accept your password
Make sure that C
password.
You forgot your startup password
The password feature (which is set in the BIOS Setup utility) is very secure,
with no easy way to recover a forgotten password. You must return your
computer for repair. Call Client Care for instructions.

Power

Your computer is not working on AC power
Make sure your AC power adapter is connected properly to your
computer. For more information, see "Connecting the AC adapter" on
page 12.
If your system is plugged into a surge protector, make sure the surge
protector is securely connected to an electrical outlet, switched on, and
working properly. To test the outlet, plug a working device, such as a
lamp, into the outlet and turn it on.
Make sure the AC power adapter cables are free from cuts or damage.
Replace any damaged cables.
Your computer is not working on battery power
Make sure the battery is installed properly. For more information, see
"Changing batteries" on page 89.
Make sure the battery is fully recharged. For more information, see
"Recharging the battery" on page 89.
Make sure the battery is calibrated correctly. For more information, see
"Recalibrating the battery" on page 139.

Printer

The printer will not turn on
Make sure the power cable is plugged into an AC power source.
and P
APS LOCK AD LOCK
are turned off, then retype the
Troubleshooting
165