Gateway Solo 1150 User Manual page 167

11
Click to clear the
click .
OK
12
Click the
Security
then click
13
Double-click the
14
Type gwclient in the
screen opens.
15
Type gwclient, then press F7. An icon (two blinking computers)
appears in the status area of the taskbar, verifying that the modem
is connected.
16
Open your Web browser.
17
Type gateway.your.way in the
If a Web page opens, your modem is working correctly.
Your fax communications program only sends and receives faxes at
14,400 bps when you have a 56K modem
Current fax technology only supports a maximum send and receive rate of
14,400 bps.
The modem is not recognized by the computer
Make sure the line connected to the modem is working and plugged into
the modem port. Use the Setup poster to make sure that the connections
have been made correctly.
If the modem shares the telephone line with another device, make sure
the telephone line is not in use (for example, someone is on the
telephone, or another modem is in use).
Use the modem cable that came with your computer. Some telephone
cables do not meet required cable standards and may cause problems with
the modem connection.
Shut down and restart your computer.
Reinstall the device driver. For more information, "Reinstalling device
drivers or programs" on page 144.
Run Windows modem diagnostics.
, and
NetBEUI
tab, click to clear the
OK.
gateway.your.way
User Name
IPX/SPX Compatible
Log on to network
icon.
text box, then click
text box, then press E
Address
Troubleshooting
check boxes, then
check box,
. A black
Connect
.
NTER
161