Fitting And Removal Of Base : Prolite Xu2495Wsu - Iiyama ProLite XUB2495WSU User Manual

FITTING AND REMOVAL OF BASE : ProLite XU2495WSU

CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Hold the monitor and install the Stand-Base to the monitor until it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Press the stopper at the back of the stand and remove the Stand-Base from the monitor.
8 BEFORE YOU OPERATE THE MONITOR
Stopper
Stand-Base