Table of Contents
Advertisement
SPECIAL NOTES
L-Brackets and screws are necessary to install an open frame monitor.
The L-Brackets are designed to be mounted to specific wall types and
CAUTION
hardware, in accordance with the installation instructions.
Using L-Bracket or screws other than those specified in the installation
instructions may damage the monitor.
As shown in fi gure below, tighten Bracket A to B using the screws supplied.
(ProLite TF1015MC: 2pairs of 2 pcs, ProLite TF1515MC / ProLite TF2215MC: 4pairs of 2 pcs,
ProLite TF2415MC: 6pairs of 2 pcs)
Screw x 2
Attach the L-bracket( ) to the back of the
recess, where the monitor is to be attached,
and fi x it with screws.
(Customer's screws: ProLite TF1015MC:
4 p c s , P r o L i t e T F1515M C / P r o L i t e
TF2215MC: 8 pcs, ProLite TF2415MC: 12
pcs)
<Mount size>
ProLite TF1015MC
271.0
259.5±0.3
Two options to apply the mount:
"A" = M4 threaded screw holes
"B" = holes without screw thread
8 BEFORE YOU OPERATE THE MONITOR
Bracket B
Bracket A
Bracket A
Screw x 2
ProLite TF1515MC
Two options to apply the mount:
"A" = M4 threaded screw holes
"B" = M4 holes without screw thread
Back of the recess
L-Bracket
78"A"
98"B"
361.7±0.4
384.8
Advertisement
Table of Contents
