Advertisement
Installation and Assembly - Vector Pro II
This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.
R
Read instruction sheet before you start installation and assembly.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
IMPORTANT! Turn to the appropriate page for your ceiling installation.
Applications:
Flush Mount .................................................................................................................................................. page 5
Extension Column ........................................................................................................................................ page 6
Installations:
To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings ........................................................................................ page 3
To Concrete Ceilings .................................................................................................................................... page 4
Visit the Peerless Web Site at www.peerlessmounts.com
™
Maximum UL Load Capacity: 50 lb (27 kg)
WARNING
1 of 7
For customer care call 1-800-729-0307 or 708-865-8870.
Models: PJF2-UNV, PJF2-UNV-S,
PJF2 SERIES
Refer to Model No. Guide Sheet
ISSUED: 05-25-05 SHEET #: 055-9247-6 11-08-06
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PEERLESS Mounts Vector Pro II PJF2-UNV Series
Summary of Contents for PEERLESS Mounts Vector Pro II PJF2-UNV Series
- Page 1 Installation and Assembly - Vector Pro II ™ Models: PJF2-UNV, PJF2-UNV-S, PJF2 SERIES Refer to Model No. Guide Sheet Maximum UL Load Capacity: 50 lb (27 kg) This product is intended for use with UL Listed products and must be installed by a qualified professional installer.
- Page 2 Before you start check the parts list to insure all of the parts shown are included. Parts List Black Silver Description Qty. Part Number Part Number A ball and socket mount 055-0011 055-0016 B 4 mm security allen wrench 560-9646 560-9646 C M5 x .8 x 10 mm socket pin type F screw 520-1164...
- Page 3 Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (G) with two #14 x 2.5" (6 mm x 65 mm) wood screws (F) as shown using 3/8"...
- Page 4 WARNING • When installing Peerless wall mounts on concrete, verify that you have a minimum of 1 5/8" of actual concrete surface in the 1/4" diameter hole to be used for the concrete anchors. Do not drill into mortar joints! Concrete must meet ASTM C-90 specifications.
- Page 5 Flush Mount Application Screw ball and socket mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1.
- Page 6 Installation to Extension Column Screw extension column to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). EXTENSION COLUMN See detail 4.
- Page 7 Note: The projector adapter plate and projector you are installing may differ in appearance from the sample illustrated below. Attach projector, with adapter plate already on it, to the To adjust roll, pitch, and yaw loosen the set screw ball and socket mount (A) by inserting the ball and (shown below) using security allen wrench (B) or socket mount (A) into the adapter plate connection and standard 4 mm allen wrench.
Need help?
Do you have a question about the Vector Pro II PJF2-UNV Series and is the answer not in the manual?
Questions and answers