Operating Modes; Auto Mode (Not Available On Low Height Version) - Atlantic Oniris AH503910 Manual

A period of at least 6 hours needs to elapse for the temperature to stabilise.
It is possible, depending on your installation, that you will record a temperature that differs from
that displayed on your appliance. In this case, refer to the "Expert Mode" - "T° Calibration" chapter.
Frost Protection Position (Plinth version without Auto Mode)
Use this function when you are absent for more than 48 hours.
Irrespective of the selected mode, to activate Frost Protection press until 7.0°C is displayed.
When you return, reset the setpoint temperature to return to normal operation.

5 - OPERATING MODES

Before performing any action, illuminate the screen by pressing any key.
Select the operating mode best suited to your requirements.
3 modes are provided in the Horizontal and Vertical Version and 2 modes are provided in the Plinth
version (Basic and Prog):
AUTO BASIC PROG
Use of smart control. The Access to the temperature Manual programming of
appliance programs itself. adjustment and to the functions (use of the internal or
connectivity functions only. external programming).
Accessing the MODES:
5.1 - Auto Mode (not available on Plinth version)
This mode allows smart control to be activated. You adjust the
desired temperature when you are present in the room and the
appliance optimises your comfort whilst implementing savings.
12
13