Installation; First Switching On; Heating Modes - Atlantic F120 Design Operating Manual

F120 WITH ELECTRONIC THERMOSTAT
Introduction
Atlantic brand founded in 1968 is known for its specialization in heating systems,
thermal comfort and energy saving technologies. New F120 model purchased by you
comes with 40 years of experience and innovations. We hope that our product fully meets
your needs. Thanks for your trust in Atlantic brand! For more detailed information about
all our solutions, please visit our website:

Installation

For installation, please see the nameplate on the product and manual
part 1/2: article U0621980.
Model CMG-BD0/M can be installed both in portable (mobile) and
fixed version.
Models CMG-BD0, CMG-BD0/PR and CMG-BD0/PW can be installed
only in fixed version.
CONTROL UNIT
❶ - Comfort mode;
❷ - ECO mode;
❸ - PROG mode;
❹ - Settings;
❺ - Mode selection;
- Confirmation;
- Back (long press);
❻ - Heating indicator;
❼ - Screen (indicator);
❽ - Increase;
❾ - Lock / unlock (long press on 2
buttons);
❿ - Decrease.

FIRST SWITCHING ON

The ON/OFF switch is located on the back side of the control unit.
- Set the On/Off button into position «I» – to switch on the appliance.
When device is switched on for the first time, the operating mode is Comfort (by default,
the heating temperature is 19°C).
- Set the On/Off button into position «0» – to switch off the appliance.
Use the switch only for long-term shutdown of the device (out of the heating season).
Please use this button only when you want to stop the heating for a long time (out of
heating season).

HEATING MODES

3 heating modes are available:
Comfort mode
Allows you to set and adjust comfortable temperature (this
temperature is also applied to the Comfort phase in Prog mode).
Eco mode
Allows you to set and adjust Eco temperature (this temperature is
also applied to the Eco phase in Prog mode).
EN
www.atlantic-comfort.com
❶ ❷ ❸ ❹ ❺
❻ ❼
2
.
❽
❾
❿