Table of Contents
Advertisement
APPENDICES
How to use web browser to control your projector
1. Turn on DHCP to allow a DHCP server to automatically assign an IP, or manually enter the required network
information.
2. Then choose apply and press
3. Open your web browser and type in IP Address from the OSD LAN screen then the web page will display as
below:
Note:
When you used the projector IP address, you will can not link to your service server.
4. Based on network web-page for the input-string in [tools] tab, the limitation for Input-Length is in the below list
("space" and the other punctuation key included):
Category
Crestron Control
Projector
Network
Configuration
User Password
Admin Password
44 English
button to complete the configuration process.
Item
IP Address
15
IP ID
2
Port
5
Projector Name
10
Location
9
Assigned To
9
DHCP (Enabled)
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
DNS Server
15
Enabled
(N/A)
New Password
15
Confirm
15
Enabled
(N/A)
New Password
15
Confirm
15
Input-Length
(characters)
Advertisement
Table of Contents
