Table of Contents
Advertisement
APPENDICES
How to use web browser to control your projector
1. Turn on DHCP to allow a DHCP server to automatically assign an IP, or manually enter the required network
information.
2. Then choose apply and press
3. Open your web browser and type in IP Address from the OSD LAN screen then the web page will display as
below:
Note:
When you used the projector IP address, you will can not link to your service server.
4. Based on network web-page for the input-string in [tools] tab, the limitation for Input-Length is in the below list
("space" and the other punctuation key included):
Category
IP Address
IP ID
Crestron Control
Port
Projector Name
Location
Projector
Assigned To
DHCP (Enabled)
IP Address
Network
Subnet Mask
Configuration
Default Gateway
DNS Server
Enabled
User Password
New Password
Confirm
Enabled
New Password
Admin Password
Confirm
button to complete the configuration process.
Input-Length
Item
(characters)
15
2
5
10
9
9
(N/A)
15
15
15
15
(N/A)
15
15
(N/A)
15
15
English 41
Advertisement
Table of Contents
