How To Use Web Browser To Control Your Projector - Optoma TW762 User Manual

User Controls
1. Turn on DHCP to allow the DHCP
server to automatically assign an IP, or
manually enter the required network
information.
2. Then choose apply and press "
" button to complete the configuration
process.
3. Open your web browser and type in the
projector's IP address from the OSD
LAN screen. The following web page will
display as below:
When you used the projector IP ad-

dress, you will can not link to your
service server.
42
English

How to use web browser to control your projector

4. The crestron control settings can be
found in the [tools] tab.(see picture)
Please note, each field can only contain
a limited number of characters, as shown
in the table below. (spaces and the other
punctuation included):
Category
IP Address
IP ID
Crestron Control
Port
Projector Name
Projector Location
Assigned To
DHCP (Enabled)
IP Address
Network
Subnet Mask
Configuration
Default Gateway
DNS Server
Enabled
User Password New Password
Confirm
Enabled
New Password
Admin Password
Confirm
Input-Length
Item
(characters)
15
2
5
10
9
9
(N/A)
15
15
15
15
(N/A)
15
15
(N/A)
15
15