Table of Contents
Advertisement
INTRODUCTION
Remote Control
No
1. Power On
Power on the projector.
2. Geometric Correction
Launch the Geometric Correction menu.
3. F1:Test pattern
Display a test pattern.
4. Display Mode
Select the display mode.
5. Four directional select keys
To select items or make adjustments.
6. Information
Display the projector information.
7. F3:Color Matching
Launch the Color Matching setting menu.
8. Input source selection
Select an input signal.
9. Menu
Launch the OSD menu. To exit OSD, Press
"Menu" again.
10. Volume Control -/+
Increase/decrease the volume.
11. Freeze
Freeze the projected image.
12. Format
Choose the projector format.
13. VGA
Switch to VGA source.
14. HDMI1
Switch to HDMI1 source.
15. HDBaseT (Depending on Model)
Switch to HDBaseT source.
16. 3D
Switch to 3D source.
17. Power Off
Power off the projector.
18. PIP/PBP Menu
Launch the PIP/PBP menu.
19. F2:LAN Settings
Launch the LAN Setting Menu.
Note:
Some keys may have no function for models that do not support these features.
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
16
English 13
Advertisement
Table of Contents
