Optoma ZU550T User Manual page 7

Safety notice
LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT
WAVE LENGTH: 450-460 nm / MAX OUTPUT: 15.9 mW / PULSE DURATION: 1.25 ms
IEC 60825-1:2014 CLASS 1 LASER PRODUCT / RISK GROUP 2
Possibly hazardous optical radiation emitted from this product.
Do not stare into the beam, May be harmful to the eyes.
IEC 60825-1:200
IEC 60825-1:2014 1
COMPLIES WITH
21 CFR 1040.10 AND
1040.11 EXCEPT FOR
DEVIATIONS PURSUANT
TO LASER NOTICE No. 50, RAYONNEMENT LASER NE PAS REGARDER DANS LE PRODUIT LASER DE
DATED JUNE 24, 2007.
CLASSES DE FAISCEAU 2.
IEC/EN 60825-1:2007
LONGUEUR D'ONDE 450-460 nm / MAX SORTIE 15.9 mW /
IEC 60825-1:2014 PRODUIT LASER DE CLASSE 1 / GROUPE A RISQUE 2
Risques possibles de rayonnements optiques
Ne pas regarder dans le faisceau. Peut
WARNING
- This product is classified as Class 2 of IEC 60825-1 : 2007 and also complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. IEC 60825-1:2014: CLASS 1 LA-
SER PRODUCT - RISK GROUP 2
- Explanatory label is shown all information of laser power.
- This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and should never
be attempted.
- Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser
radiation exposure.
- Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
- Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
- When turning on the projector, make sure no one within projection range is looking at the lens.
- Without following the control, adjustment or operation procedure may cause damage by the exposure of laser
radiation.
- Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning precau-
tions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits in
Class 2.
- This projector is a Class 2 laser device that conforms with IEC 60825-1:2007 and CFR 1040.10 and 1040.11.
- Class 2 laser product, Do Not Stare Into Beam.
- This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and should never
be attempted.
- Any operation or adjustment not specifically instructed by the user's guide cre- ates the risk of hazardous laser
radiation exposure.
- Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
- Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
- Without following the control, adjustment or operation procedure may cause damage by the exposure of laser
radiation.
- Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning precau-
tions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits in
Class 2.
2
-460 nm / : 15.9 mW / : 1.25 ms
/ 2
,
ém is par ce produit.
êt re dangereux pour les yeux.
DURÉE PULSE 1.25 ms
English 7