G G G G G Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
NOTE
In case the strong flicker or blurs remain on a part of the screen, repeat steps F and
G because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from C again.
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
H H H H H Adjust the Brightness and Color Temp. to get the desired picture after you complete
the Clock and Phase adjustments.
Put back your favorite wallpaper.
16 OPERATING THE MONITOR
PLE437S-e.p65
+
–
22
2005/06/13, 18:15