INSTALLATION OF STAND
The monitor is designed to be used with the stand installed. Be sure to install the stand before
operating the monitor.
CAUTION
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
Hold the monitor and push the post
down into the stand.
PLE437S-e.p65
<Remove>
Push the hooks in the direction of the arrows
and pull the stand away from the post.
11
BEFORE YOU OPERATE THE MONITOR
2005/06/13, 18:15
5