Panasonic Lumix DC-GH5KBODY Basic Operating Instructions Manual page 58

Recording
> [Motion Picture] > [Time Code]
MENU
[Time Code Set whether or not the time code is displayed on the recording screen/
Display] playback screen.
Sets the time code count method.
[REC RUN]:
Counts the time code only when recording motion pictures.
[Count Up]
[FREE RUN]:
Counts the time code even when not recording (including when this unit is
turned off).
Sets the start point (starting time) for the time code.
[Reset]:
Sets to 00:00:00:00 (hour: minute: second: frame)
[Time Code
[Manual Input]:
Value]
Manually input hour, minute, second and frame.
[Current Time]:
Sets hour, minute and second to current time and sets frame to 00.
Sets the time code recording method.
[DF] (Drop Frame):
The camera modifies the difference between recorded time and time code.
[Time Code
• Seconds and frames are separated by ".". (Example: 00:00:00.00)
Mode]
[NDF] (Non-Drop Frame):
Records the time code without drop frame.
• Seconds and frames are separated by ":". (Example: 00:00:00:00)
Generates time code for images output through HDMI.
• [HDMI Time Code Output] can only be set in Creative Video Mode.
[HDMI Time
• When using the HDMI output and outputting videos that do not include time
Code Output]
• The device screen may go dark depending on the connected device.
∫ Conditions for outputting a time code to HDMI output
A time code is output to video from the HDMI output only when all the following conditions
are satisfied.
In recording
• When [HDMI Time Code Output] is set to
[ON].
• In Creative Video Mode.
• When [Rec Format] is set to [AVCHD], [MP4
(LPCM)] or [MOV].
58
DVQX1072 (ENG)
codes (e.g., when [Rec Format] is set to [MP4]), a time code will not be
output.
In playback
• When [HDMI Time Code Output] is set to
[ON].
• When playing back a motion picture recorded
with Creative Video Mode.
• When [HDMI Mode (Play)] in [TV Connection]
is set to [AUTO].