Table of Contents
Advertisement
Menu
[Metering Mode]
Applicable modes:
Type of optical measurement to measure brightness can be changed.
>
[Rec] > [Metering Mode]
MENU
[
]
(Multiple)
[
]
(Centre weighted)
[
]
(Spot)
[Silent Mode]
Applicable modes:
Disables operational sounds and output of light at once.
>
[Rec] > [Silent Mode]
MENU
Settings: [ON]/[OFF]
• Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled.
The following settings are fixed.
– [Flash Mode]: [Œ] (forced flash off)
– [Shutter Type]: [ESHTR]
– [AF Assist Lamp]: [OFF]
• Even when [ON] is set, the following functions light up/flash.
– Status indicator
– Self-timer indicator
• Sounds that are produced by the camera regardless of your operations, such as the lens
aperture sound, cannot be muted.
• Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
78
DVQX1072 (ENG)
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
This is the method used to focus on the subject on the centre of the
screen and measure the whole screen evenly.
This is the method to measure the subject in the spot metering target.
• If you set the spot metering target on the edge of the screen, the
metering may be affected by the brightness around the location.
– [Beep Volume]: [s] (OFF)
– [E-Shutter Vol]: [
– WIRELESS connection lamp
] (OFF)
Advertisement
Table of Contents
