Specifying The Af Area Position - Panasonic Lumix DC-GH5KBODY Basic Operating Instructions Manual

Recording
([225-Area])
, etc.
([Custom Multi])
([1-Area])
([Pinpoint])

Specifying the AF area position

• When [Focus Switching for Vert / Hor] in the [Custom] ([Focus / Release Shutter]) menu is set,
the last specified positions of the AF area (when [ Ø ] or [
are stored separately for the camera's horizontal and vertical orientations (two vertical
orientations, left and right, are available).
Specifying the AF area position on the setting screen
Applicable modes:
∫ When selecting [š], [
1
Press [ ].
2
Select [š], [
3
Change the position and size of the AF area.
Button
operation
3/4/2/1
/ /
[DISP.]
4
Press [MENU/SET] to set.
• AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [
32
DVQX1072 (ENG)
Up to 225 AF areas can be focused.
This is effective when a subject is not in the centre of the screen.
From among 225 AF areas, you can freely set the optimum shape of the
AF area for the subject.
The camera focuses on the subject in the AF area on the screen.
You can achieve a more precise focus on a point that is smaller than
[Ø].
If you press the shutter button halfway, the screen that lets you check
the focus will be enlarged.
], [Ø]
] or [Ø] and press 4.
Touch
operation
Touching
Pinching out/in Changes the size
[Reset]
] is set) and the MF Assist display
Description of operation
Moves the position
First time: The position is
reset to the centre
Second time: The size is
reset to the default
] is touched.