Foscam Synology DS218play User Manual page 61

port for you.
Go to camera Status > Device Status menu, and you can check if camera's DDNS is successful. For the case
DDNS shows failed, please follow below tips to help it synchronize:
(1) Change DNS server to 8.8.8.8.
Please login camera's web-page, and go to the IP configuration (For HD cameras) or basic network settings
(For SD cameras) menu to make the change.
(2) Reboot the camera and router, wait a few minutes to check again.
(3) Use a 3rd party DDNS instead, like No-IP, to see if it works.
5.1.5 Forgot camera's user name and password
Camera can be hard reset to default settings, when you forgot camera's login user name and password. Below
are the steps:
(1) Keep power on camera;
(2) Press and hold reset button of camera for 30 second, till it reboots. Reset button is on bottom, or back, or
end cords of the camera.
(3) Once reset, camera will be restored to default settings. And default username is admin, no password
(leave password blank).
5.1.6 How to setup alarm Emails
Setup alarm Emails, when camera detects a motion it'll send Email with snapshot to inform about the motion
alarm. Steps as below.
Step 1: Setup Mail Settings
Before you set, please make sure that your email for sender enabled SMTP. And get your Email SMTP server,
SMTP port, TLS information ready.
Please go to Settings > Network > Mail Settings menu to setup your email firstly.
59