TP-Link TL-WR941HP User Manual page 97

3.4.17.2. IPv6 Setup
 Enable IPv6 - Tick the checkbox to enable the IPv6 function. It's enabled by default.

WAN Connection Type - Choose the correct WAN connection type based on your ISP
network topology.

SLAAC - Connections which use Radvd IPv6 address assignment.

DHCPv6 - Connections which use dynamic IPv6 address assignment.

Static IPv6 - Connections which use static IPv6 address assignment.

PPPoEv6 - Connections which use PPPoEV6 that requires a user name and
password.

Tunnel 6to4 - Connections which use 6to4 address assignment.
Different types of WAN connection require you to do different settings. Below are the detailed
explanations for the respective type.
SLAAC
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 3-76 Enable/Disable IPv6
86