TP-Link TL-WR941HP User Manual page 89

3.4.12.1. Control Settings
Go to "Advanced→Bandwidth Control→Control Settings", and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. For optimal control of the
bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of the
egress and ingress.

Enable Bandwidth Control - Select this checkbox so that the Bandwidth Control settings
can take effect.
 Line Type - Select the right type for you network connection. If you don't know how to
choose, please ask your ISP for the information.

Egress Bandwidth - The upload speed through the Internet port

Ingress Bandwidth - The download speed through the Internet port.
3.4.12.2. Rule List
Go to "Advanced→Bandwidth Control→Rule List", and then you can view and configure the
Bandwidth Control rules in the screen below.

Description - This is the information about the rules such as address range.

Egress bandwidth - This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
TL-WR941HP
Figure 3-65 Bandwidth Control Settings
Figure 3-66 Bandwidth Control Rules List
78
450Mbps High Power Wireless N Router
.