TP-Link TL-WR941HP User Manual page 51


Note:
If you check the
will find a notice in red as shown below.

Wireless Password - You can enter ASCII characters between 8 and 63 characters
or 8 to 64 Hexadecimal characters. The default password is the same with the default
PIN code, which is labeled on the router or can be found in Figure 3-20.

Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
 WPA/WPA2- Enterprise - It's based on Radius Server. If you choose WPA/WPA2 -
Enterprise, WPS function will be disabled.

Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or
TL-WR941HP
WPA/WPA2-Personal
Figure 3-24 WPA/WPA2 - Enterprise
40
450Mbps High Power Wireless N Router
radio button and choose TKIP encryption, you