Forwarding - TP-Link TL-WR941HP User Manual

2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in
dotted-decimal notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
Figure 3-34 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.

3.4.7 Forwarding

There are four submenus under the Forwarding menu: Virtual Servers, Port Triggering, DMZ
and UPnP. Click any of them, and you will be able to configure the corresponding function.
3.4.7.1. Virtual Servers
Go to "Advanced→Forwarding→Virtual Servers", and then you can view and add virtual
servers. Virtual servers can be used for setting up public services on your LAN. A virtual server
is defined as a service port, and all requests from Internet to this service port will be redirected
to the computer specified by the server IP. Any PC that was used for a virtual server must have
a static or reserved IP address because its IP address may change when using the DHCP
TL-WR941HP 450Mbps High Power Wireless N Router
51