TP-Link TL-WR941HP User Manual page 78

There are two methods to add a new rule.
Method One:
1. Click Setup Wizard button and the next screen will appear as shown in Figure 3-48.

Host Description - In this field, create a unique description for the host (e.g. Host_1).

Mode - Here are two options, IP Address and MAC Address. You can select either of
them from the drop-down list.
If the IP Address is selected, you can see the following item:
LAN IP Address - Enter the IP address or address range of the host in dotted-decimal
format (e.g. 192.168.0.23).
If the MAC Address is selected, you can see the following item:
MAC Address - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format
(e.g. 00-11-22-33-44-AA).
2. Click Next when finishing creating the host entry. The next screen will appear as shown in
Figure 3-49.
Figure 3-49 Quick Setup – Create an Access Target Entry

Target Description - In this field, create a description for the target. Note that this
description should be unique (e.g. Target_1).

Mode - Here are two options, IP Address and Domain Name. You can choose either of
them from the drop-down list.
TL-WR941HP
Figure 3-48 Quick Setup – Create a Host Entry
450Mbps High Power Wireless N Router
67