TP-Link TL-WR941HP User Manual page 50

2) The WPS function cannot be configured if the Wireless Function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
3.4.3.3. Wireless Security
Go to "Advanced→Wireless→Wireless Security", you can configure the security settings of
your wireless network. There are four wireless security modes supported by the router: Disable
Security, WPA/ WPA2-Personal, WPA/ WPA2-Enterprise, and WEP.

Disable Security - The wireless security function can be enabled or disabled. If disabled,
the wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose the other options to enable security.
 WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared
passphrase. The router is configured by this security type by default.

Version - You can choose the version of the Automatic, WPA-PSK or WPA2-PSK
security from the drop-down list. The default setting is WPA2-PSK.

Encryption - You can select Automatic, TKIP or AES as Encryption. The default
setting is AES.
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 3-22 Disable security
Figure 3-23 WPA/WPA2-Personal
39