2. Select one option among nine by ▲ or ▼.
Black Level Adjustment
This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING).
Adjust the brightness level if you feel the difference is too large.
NOTE:
This function is enabled only when [MODE] is turned on.
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
Example: Adjusting the Black Level when placing two projectors side by side
Adjust [CENTER]
Adjust [CENTER-RIGHT]
1.
Select
[DISPLAY] → [EDGE BLENDING] →
The screen will switch to the black level adjustment screen.
Width of overlap
Projector A's
Projector B's
image
image
[BLACK LEVEL] and press the ENTER button.
74
4. Multi-Screen Projection
Adjust [CENTER]
Adjust [CENTER-LEFT]