Advertisement
19
Put plug from fan through hole in
switch plate.
22
Loosen 2 screws and remove 1 screw
from light pan. Save screw for
later use.
25
Install 3 x 40 w att candelabra bulbs. Bulbs
included.
WARNING: Over lamping the fan will
result in the fan lights shutting down
until the proper wattage of bulbs are
installed.
Reset the lights by turning off the wall
switch, breaker,or by remote. Replace
bulbs with the correct wattage bulbs, turn
the power on.
© 2011 Monte Carlo Fan Company
20
Install switch plate b y placing over
the 2 screws and twisting into place.
Install screw removed and tighten all
3 screws securely.
23
Plug white wire from fan to white
wire from light kit. Then plug blue
wire from fan to black wire from
light kit.
26
Install glass and finial nut.
5
21
Push plug from fan and plug from
switch plate together.Match the color
strips on the plugs.
24
Attach light fixture by aligning keyhole
slots on light fixture with screws on light
pan and twist clockwise till lock. Re-install
the screw removed in step 22. Tighten all
screws securely.
6/1/2012
Advertisement
