Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
4LNCR56XXX Series Fan
cETL Model NO. : 4LNCR56
RETAILER NAME:
RETAILER ADDRESS:
6.98 kg
15.36 lbs
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company Launceton 56 4LNCR56 Series
Summary of Contents for Monte Carlo Fan Company Launceton 56 4LNCR56 Series
- Page 1 Owner’s Guide and Installation Manual 4LNCR56XXX Series Fan cETL Model NO. : 4LNCR56 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 6.98 kg 15.36 lbs Total fan weight...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70), including fire-rated construction. - Page 3 Mounting bracket Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
- Page 4 Canopy Decorative cap Downrod Downrod Canopy bottom cap Keeper pin Yoke cover Cross pin Yoke Install a decorative plate onto the adapter Flip the fan assembly over and carefully Place downrod over canopy, canopy place it on Styrofoam. by turning clockwise till tight. bottom cap and yoke cover.
- Page 5 SAFETY CABLE INSTALLATION Wall Switch Black (Live) Power source White (Neutral) Ground/Green Red (Motor 1) Purple (Motor 2) Lag screw Gray (Motor 3) Safety cable Green/Ground Receiver Washer Black (AC IN L) Lock washer White (AC IN N) For Canadian installation and for USA fan Make wiring connections using wire connectors provided as indicated above.
-
Page 6: Remote Control Setting And Operation
REMOTE CONTROL SETTING and OPERATION Transmitter Operation Remove the battery cover from the remote control transmitter and install battery, battery provided. Replace the cover. Note: Use 2 1.5V/AAA battery. Note: If not using for long period of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity. - Page 7 The buttons on the remote control transmitter control the fan speed as follows. Fan speed 1 = minimum speed 2 = low speed 3 = medium low speed 4 = medium speed 5 = medium high speed 6 = high speed This button turns the fan off.
-
Page 8: Troubleshooting
Trouble Shooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. - Page 9 Jan.2020...