Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5CSM60XX Series Fan
UL Model NO. : 5CSM60XX
RETAILER NAME:
RETAILER ADDRESS:
11 kgs
24.2 lbs
Total fan weight
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5CSM60 Series
Summary of Contents for Monte Carlo Fan Company 5CSM60 Series
- Page 1 Owner’s Guide and Installation Manual 5CSM60XX Series Fan UL Model NO. : 5CSM60XX Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 11 kgs 24.2 lbs Total fan weight...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2016 Monte Carlo Fan Company 4/20/2016... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2016 Monte Carlo Fan Company 4/20/2016...
- Page 4 Outlet up into the outlet box. box. Make sure the studs protruding from the bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2016 Monte Carlo Fan Company 4/20/2016...
- Page 5 Safety Cable in the U.S., Do Not Remove the outlet box. The splices after being made Knockouts In The Outlet Box. should be turned upward and pushed carefully up into the outlet box. © 2016 Monte Carlo Fan Company 4/20/2016...
- Page 6 Be sure plugs reverse switch on switch housing, then install the switch housing onto connection clasped together completely. the top plate with the 3 set screws removed in step 21 and tighten all screws securely. © 2016 Monte Carlo Fan Company 4/20/2016...
- Page 7 Note: Reverse switch must be set either way completely. If the reverse switch is set in the middle position, fan will not operate. © 2016 Monte Carlo Fan Company 4/20/2016...
-
Page 8: Troubleshooting
WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off, replace bulbs with the correct wattage bulbs, Turn power on. © 2016 Monte Carlo Fan Company 4/20/2016... - Page 9 Apr.2016...
Need help?
Do you have a question about the 5CSM60 Series and is the answer not in the manual?
Questions and answers